• Highest accuracy for inventory and custody transfer for various tank types and products
• Different antenna options: Parabolic, Horn, Still-pipe Array, LPG/LNG
• Non-contacting, making the gauges virtually unaffected by process conditions
• 2-in-1 gauge option for cost-efficient redundancy
• Wireless version available for cost-efficient installation, to utilize more data and get redundant communication possibilities
• SIL 2 and SIL 3 certified by Exida according to IEC 61508-2 and 61508-3
• TÜV-tested and approved for overfill protection according to WHG regulations
• No moving parts, means little or no maintenance
• Installation is normally made with the tank in operation (except for pressurized tanks)

• Suitable for various tank types and products
• Available with different antenna options: parabolic, cone, still-pipe array, LPG/LNG
• Non-contacting, making the gauges virtually unaffected by process conditions
• Wireless version available for cost-efficient installation, to utilize more data and get redundant communication possibilities
• SIL 2 certified by Exida according to IEC 61508-2 and 61508-3
• No moving parts, means little or no maintenance
• Installation is normally made with the tank in operation (except for pressurized tanks)

• Direct Switch Technology enables a stronger signal than other 2-wire GWR transmitters, providing better measurement capability and reliability.
• Probe End Projection allows for measurement on very low dielectric products over long ranges.
• Verification Reflector function provides simple and safe transmitter integrity testing straight from the control room.
• Improved EMC performance with a Smart Galvanic Interface increases safety.
• Easy integration into new or existing plants with a choice of 4-20 mA with superimposed HART, modbus output, or FOUNDATION ™ fieldbus with extensive support forPlantWeb® Alerts.
• Powerful and easy-to-use configuration tools.
• A wide range of probe styles to cover virtually any applications including extreme temperature and pressure probes for demanding environments.
• Robust modular design and MultivariableTM transmitter resulting in low cost and increased safety.
• Virtually unaffected by application conditions such as dust, vapor and interfering obstacles.
• Certified per IEC61508 for SIL2 in single mode and SIL3 in redundant mode
• Rosemount 9901 – high quality chambers for process level instrumentation

Guided Wave Radar is a continuous level measurement technique that offers several advantages. It is virtually unaffected by temperature, pressure and vapor gas mixtures. It has no moving parts and therefore requires little or no maintenance. It measures the level directly and is therefore unaffected by most fluid property changes, including but not limited to density and viscosity changes. Additionally, the Rosemount 5300 Series offers the following benefits:

• Higher measurement reliability and capability resulting in improved process uptime through
• Robust design resulting in reduced operating costs and safety
• Easy commissioning resulting in reduced startup costs through

Radar is a continuous level measurement technique that offers several advantages. It is virtually unaffected by temperature, pressure and vapor gas mixtures. It is a non-contacting method with no moving parts and therefore requires little or no maintenance. It measures the level directly and is therefore unaffected by most fluid property changes, including but not limited to density and viscosity changes.

Applications:

The Rosemount 5400 Series can be used for continuous non-contacting level and volume measurements of liquids and semi-liquids. The unchallenged Signal-to-Noise ratio in conjunction with a wide range of antennas and the flexibility of having a low- and high frequency version make it suitable for almost any application in the process industry. 

• Buffer Tanks 
  For measurements in tanks with a calm or slightly turbulent surface, the Rosemount 5400 Series transmitter is the preferred choice, particularly where the tank has a narrow nozzle opening. 
• Chambers and stilling wells
  The 5400 is an excellent choice for level gauging in tanks with stilling wells. It may also be used in some chambers, but Guided Wave Radar is generally the best fit for these applications.
• Reactor Tanks 
  The state-of-the art signal processing provided by the 5400 makes it a very suitable choice for tanks with harsh and varying process conditions.

Features:

• Get custody transfer net volume accuracy with three- or four-wire multiple spot temperature sensors for bulk liquid storage tanks.
• Improve accuracy with unique sensor calibration.
• Measure liquid temperature with up to 16 spot elements.
• Include specialized sensor for cryogenic tank temperature measurement in LNG applications (Rosemount 566).
• Combine with integrated water level sensor (Rosemount 765).
• Select from a wide range of accessories such as anchor weights and vapor boots.

• Highest reliability and custody transfer accuracy with up to 14 Pt-100 sensor elements
• Rugged design for harsh environments
• Available with 1/6 and 1/10 DIN B temperature accuracy class
• Wide range of accessories includes anchor weights, flanges, vapor boots, junction boxes
• Thermowell available for single spot version.
• Version with integrated water level sensor is available
• Easy integration in Rosemount Tank Gauging System (sometimes connected directly into gauge)

• Ultra-stable with an impressive temperature conversion accuracy of 
  ± 0.05 °C (± 0.09 °F) suitable for demanding custody transfer applications
• IP 66/67 and Nema 4X certified robust design makes it suitable for installation in harsh environments
• Connects sixteen 3- or 4-wire temperature spot elements and an integrated water level sensor
• Built-in on-line calibration feature

Rosemount 2410 handles communication between the field devices and the control room, and it is available in two versions, for single or multiple tanks. It also feeds power to the Rosemount field devices on the FISCO compliant intrinsically safe Tankbus.

The tank hub collects measurement values, such as level, temperature, and pressure. It calculates average temperature, observed density and strapping table based volume. Such data can be presented on the optional integrated back-lit display, a separate 2230 display, or be sent to TankMaster or a host system. It is equipped with an integrated FISCO-certified IS barrier, has power conditioner functionality, and built-in electronics for bus termination. Rosemount 2410 can be equipped with two solid state relays which can be configured to be controlled by level, temperature, and water level.

The Hub is SIL 2 and SIL 3 certified, and a third relay is dedicated for SIL overfill functionality. This relay is part of a separate SIL alarm channel, which has an independent software function, controlling the relay and providing extensive diagnostics. It is activated both if the alarm level is reached and/or if a device malfunction occurs, and operates in a normally closed mode. The output can be connected to an emergency shut-down (ESD) system.

• Handles communication between field devices and control room
• Communicates with the devices on one or several tanks via the intrinsically safe FISCO Tankbus
• Communicates with a host or field communication unit via TRL2 Modbus, RS485, Enraf, HART/WirelessHART
• Supports autoconfiguration of the Tankbus (identifies and autoaddresses field devices in the network)
• Calculates average temperature, observed density and strapping table based volume 
• Supplies power to the units on the Tankbus
• Features integrated IS barrier, power conditioner functionality, and built-in bus termination
• Two user configurable solid state relays
• Separate relay dedicated for SIL alarm channel

• Observe real time tank gauging data such as level, temperature, pressure and total observed volume.
• Choose between seven languages and several view options.
• Install in hazardous areas.
• Obtain excellent readability with back-lit display.
• Get legal custody transfer read-out.
• Benefit from a two-wire, low voltage Tankbus for easy and safe installation.

• Remote read-out of calculated data such as level, average temperature, pressure and volume
• Back-lit with excellent readability
• Easy to install and use
• Navigation with 4-key display keyboardNavigation with 4-key display keyboard
• Different view options
• Robust, weather / dirt protection

• Ensure fast data update rate.
• Use for up to 64 tanks.
• Benefit from scalable options for all system sizes.
• Get flexible and configurable multiple port connectivity.
• Enable emulation by bringing in data from other vendor gauges.

• Ensure fast data update rate
• Serves up to 64 tanks
• Benefit from scalable options for all system sizes
• Get flexible, and configurable multiple port connectivity

• Achieve record productivity
• Reduce maintenance and downtime with the industry’s most reliable, highest performing pressure transmitter
• Detect process and electrical loop issues before they impact production with Advanced Diagnostics

• Keep your operation on spec
• Tighten process control with Ultra and Ultra for Flow performance classes
• Gain tighter control of your level applications with Electronic Remote Sensors (ERS)

• Enhance energy efficiency
• Effectively track usage of steam and natural gas with MultiVariable Flowmeters
• Reduce permanent pressure loss by up to 96% with Annubar Flowmeters

• Safeguard your people, facility, and the environment
• Quickly and cost effectively add new points to eliminate operator rounds with Wireless
• Limit worker exposure to hazardous areas or dangerous heights with Remote Display and Interface

• Function virtually unaffected by flow, bubbles, turbulence, foam, vibration, solids content, coating products, liquid properties, and product variations
• No need for calibration and requires only a minimum amount of installation
• Easy terminal access and hook-up with electrical protections
• No moving parts or crevices means virtually no maintenance
• Basic electronic self-checking and condition monitoring
• Visible Heartbeat LED shows device status
• Adjustable Switching Delay for turbulent or splashing applications
• Local Magnetic Test Point makes functional test easy
• Small in size and weight
• Short fork for minimized protrusion into pipework
• Extended lengths up to 157.5-in. (4 m)
• "Fast Drip" Fork Design gives quicker response time
• General area, Explosion-proof ⁄ Flameproof, and Intrinsically Safe options

• Virtually unaffected by turbulence, foam, vibration, solids content, coating products, and liquid properties
• The mid-range temperature version of the Rosemount 2130 operates in process temperatures of –40 to 356 °F (–40 to 180 °C).
• The high temperature version of the Rosemount 2130 operates in process temperatures of –94 to 500 °F (–70 to 260 °C). It has a stainless steel thermal tube to move the electronics away from the process.
• Electronic self-checking and condition monitoring. The 'heartbeat’ LED on the electronics cassette gives status and health information on the Rosemount 2130.
• Adjustable switching delay prevents false switching in turbulent or splashing applications
• Fast drip’ fork design gives quicker response time, especially with viscous liquids.
• Rapid wet-to-dry time for highly responsive switching
• Fork shape is optimized for hand polishing to meet hygienic requirements.
• No moving parts or crevices for virtually no maintenance.
• There is a variety of plug-in electronics options, each having an adjustable mode and switching delay.

• Intrinsically safe design enables routine maintenance in hazardous areas
• Predictable life specified under installed conditions
• Robust design for use in harsh environments
• Low level alerts for easy maintenance
• Keyed connection for easy and fail-safe replacement